Forms

Lissencephaly-6 with Microcephaly via KATNB1 Gene Sequencing with CNV Detection

  • Summary and Pricing
  • Clinical Features and Genetics
  • Citations
  • Methods
  • Ordering/Specimens
Order Kits
TEST METHODS

Sequencing with CNV

Test Code Test Copy GenesPriceCPT Code Copy CPT Codes
5421 KATNB1$890 81479,81479 Add to Order
Targeted Testing

For ordering sequencing of targeted known variants, please proceed to our Targeted Variants landing page.

Turnaround Time

The great majority of tests are completed within 26 days.

Clinical Sensitivity

Pathogenic variants in the KATNB1 gene appear to be rare. To date, only three pathogenic variants have been implicated in lissencephaly-6 with microcephaly (Hu et al. 2014. PubMed ID: 25521379). All reported pathogenic variants are detectable by sequencing.

See More

See Less

Clinical Features

Lissencephalies and subcortical band heterotopia (SBH) are a group of cerebral malformations involving arrest of neuronal migration during embryogenesis. Lissencephaly is characterized by simplification or absence of the brain convolutions, resulting in a smooth appearance. SBH, also known as double cortex, is characterized by abnormal bands of neurons beneath a normal cortex. Lissencephalies and SBH are characterized by intellectual disability and seizures. Additional features include microcephaly, subtle dysmorphic features, failure to thrive, difficulty feeding and swallowing, malformations of the digits, muscle spasms, myoclonic jerks, cognitive impairment, and poor social interactions (Leventer et al. 2001. PubMed ID: 11502906; Wallerstein et al. 2008. PubMed ID: 18462864; Dobyns. 2010. PubMed ID: 20331703; Di Donato et al. 2017. PubMed ID: 28440899). The incidence of lissencephalies is ~1:100,000 live births (https://www.orpha.net).

Lissencephalies are clinically and genetically heterogeneous. Several forms are recognized. They are distinguished on the basis of the clinical features and the causative genes.

Lissencephaly-6 with microcephaly (LIS6) is characterized by developmental delay, severe microcephaly, simplified gyral pattern, thin corpus callosum, and partial agenesis of the corpus callosum. Additional MRI findings include heterotopia of the gray matter and dilated ventricles (Mishra-Gorur. 2014. PubMed ID: 25521378).

Genetics

Lissencephaly-6 with microcephaly is inherited in an autosomal recessive manner. It has been shown to be caused by homozygous pathogenic variants in the KATNB1 gene in three unrelated Middle Eastern families with a history of the disease. They include 2 missense variants and one splicing variant (Hu et al. 2014. PubMed ID: 25521379).

The KATNB1 gene encodes a regulatory subunit of katanin, a microtubule severing enzyme that is involved in several cellular processes including mitosis, meiosis, and neuronal morphogenesis, function and plasticity (Sharp and Ross. 2012. PubMed ID: 22595526).

Testing Strategy

For this Next Generation Sequencing (NGS) test, sequencing is accomplished by capturing specific regions with an optimized solution-based hybridization kit, followed by massively parallel sequencing of the captured DNA fragments. Additional Sanger sequencing is performed for regions not captured or with insufficient number of sequence reads.

For Sanger sequencing, polymerase chain reaction (PCR) is used to amplify targeted regions. After purification of the PCR products, cycle sequencing is carried out using the ABI Big Dye Terminator v.3.0 kit. PCR products are resolved by electrophoresis on an ABI 3730xl capillary sequencer. In nearly all cases, cycle sequencing is performed separately in both the forward and reverse directions.

Copy number variants (CNVs) are also detected from NGS data. We utilize a CNV calling algorithm that compares mean read depth and distribution for each target in the test sample against multiple matched controls. Neighboring target read depth and distribution and zygosity of any variants within each target region are used to reinforce CNV calls. All CNVs are confirmed using another technology such as aCGH, MLPA, or PCR before they are reported.

This test provides full coverage of all coding exons of the KATNB1 gene, plus ~10 bases of flanking noncoding DNA. We define full coverage as >20X NGS reads or Sanger sequencing.

Since this test is performed using exome capture probes, a reflex to any of our exome based tests is available (PGxome, PGxome Custom Panels).

Indications for Test

Candidates for this test are patients with lissencephaly with or without microcephaly.

Gene

Official Gene Symbol OMIM ID
KATNB1 602703
Inheritance Abbreviation
Autosomal Dominant AD
Autosomal Recessive AR
X-Linked XL
Mitochondrial MT

Disease

Name Inheritance OMIM ID
Lissencephaly 6, with microcephaly AR 616212

CONTACTS

Genetic Counselors
Geneticist
Citations
  • Di Donato et al. 2017. PubMed ID: 28440899
  • Dobyns. 2010. PubMed ID: 20331703
  • Hu et al. 2014. PubMed ID: 25521379
  • Leventer et al. 2001. PubMed ID: 11502906
  • Mishra-Gorur et al. 2014. PubMed ID: 25521378
  • Sharp and Ross. 2012. PubMed ID: 22595526
  • Wallerstein et al. 2008. PubMed ID: 18462864
Order Kits
TEST METHODS

Exome Sequencing with CNV Detection

Test Procedure

For the PGxome we use Next Generation Sequencing (NGS) technologies to cover the coding regions of targeted genes plus ~10 bases of non-coding DNA flanking each exon. As required, genomic DNA is extracted from patient specimens. Patient DNA corresponding to these regions is captured using Agilent Clinical Research Exome hybridization probes. Captured DNA is sequenced on the NovaSeq 6000 using 2x150 bp paired-end reads (Illumina, San Diego, CA, USA). The following quality control metrics are generally achieved: >97% of target bases are covered at >20x, and mean coverage of target bases >120x. Data analysis and interpretation is performed by the internally developed software Titanium-Exome. In brief, the output data from the NovaSeq 6000 is converted to fastqs by Illumina Bcl2Fastq, and mapped by BWA. Variant calls are made by the GATK Haplotype caller and annotated using in house software and SnpEff. Variants are filtered and annotated using VarSeq (www.goldenhelix.com).

For Sanger sequencing, polymerase chain reaction (PCR) is used to amplify targeted regions. After purification of the PCR products, cycle sequencing is carried out using the ABI Big Dye Terminator v.3.0 kit. PCR products are resolved by electrophoresis on an ABI 3730xl capillary sequencer. In nearly all cases, cycle sequencing is performed separately in both the forward and reverse directions.

Copy number variants (CNVs) are also detected from NGS data. We utilize a CNV calling algorithm that compares mean read depth and distribution for each target in the test sample against multiple matched controls. Neighboring target read depth and distribution and zygosity of any variants within each target region are used to reinforce CNV calls. All CNVs are confirmed using another technology such as aCGH, MLPA, or PCR before they are reported.

Analytical Validity

NextGen Sequencing: As of March 2016, 6.36 Mb of sequence (83 genes, 1557 exons) generated in our lab was compared between Sanger and NextGen methodologies. We detected no differences between the two methods. The comparison involved 6400 total sequence variants (differences from the reference sequences). Of these, 6144 were nucleotide substitutions and 256 were insertions or deletions. About 65% of the variants were heterozygous and 35% homozygous. The insertions and deletions ranged in length from 1 to over 100 nucleotides.

In silico validation of insertions and deletions in 20 replicates of 5 genes was also performed. The validation included insertions and deletions of lengths between 1 and 100 nucleotides. Insertions tested in silico: 2200 between 1 and 5 nucleotides, 625 between 6 and 10 nucleotides, 29 between 11 and 20 nucleotides, 25 between 21 and 49 nucleotides, and 23 at or greater than 50 nucleotides, with the largest at 98 nucleotides. All insertions were detected. Deletions tested in silico: 1813 between 1 and 5 nucleotides, 97 between 6 and 10 nucleotides, 32 between 11 and 20 nucleotides, 20 between 21 and 49 nucleotides, and 39 at or greater than 50 nucleotides, with the largest at 96 nucleotides. All deletions less than 50 nucleotides in length were detected, 13 greater than 50 nucleotides in length were missed. Our standard NextGen sequence variant calling algorithms are generally not capable of detecting insertions (duplications) or heterozygous deletions greater than 100 nucleotides. Large homozygous deletions appear to be detectable.

Copy Number Variant Analysis: The PGxome test detects most larger deletions and duplications including intragenic CNVs and large cytogenetic events; however aberrations in a small percentage of regions may not be accurately detected due to sequence paralogy (e.g., pseudogenes, segmental duplications), sequence properties, deletion/duplication size (e.g., 1-3 exons vs. 4 or more exons), and inadequate coverage. In general, sensitivity for single, double, or triple exon CNVs is ~70% and for CNVs of four exon size or larger is >95%, but may vary from gene-to-gene based on exon size, depth of coverage, and characteristics of the region.

Analytical Limitations

Interpretation of the test results is limited by the information that is currently available. Better interpretation should be possible in the future as more data and knowledge about human genetics and this specific disorder are accumulated.

When sequencing does not reveal any heterozygous differences from the reference sequence, we cannot be certain that we were able to detect both patient alleles.

For technical reasons, the PGxome test is not 100% sensitive. Some exons cannot be efficiently captured, and some genes cannot be accurately sequenced because of the presence of multiple copies in the genome. Therefore, a small fraction of sequence variants will not be detected.

We sequence coding exons for most given transcripts, plus ~10 bp of flanking non-coding DNA for each exon. Unless specifically indicated, test reports contain no information about other portions of the gene, such as regulatory domains, deep intronic regions, uncharacterized alternative exons, chromosomal rearrangements, repeat expansions, epigenetic effects, and mitochondrial genome variants.

In most cases, we are unable to determine the phase of sequence variants. In particular, when we find two likely causative mutations for recessive disorders, we cannot be certain that the mutations are on different alleles.

Our ability to detect minor sequence variants due to somatic mosaicism is limited. Sequence variants that are present in less than 50% of the patient's nucleated cells may not be detected.

Runs of mononucleotide repeats (eg (A)n or (T)n) with n >8 in the reference sequence are generally not analyzed because of strand slippage during amplification.

Unless otherwise indicated, DNA sequence data is obtained from a specific cell-type (usually leukocytes if taken from whole blood). Test reports contain no information about the DNA sequence in other cell-types.

We cannot be certain that the reference sequences are correct.

Balanced translocations or inversions are only rarely detected.

Certain types of sex chromosome aneuploidy may not be detected.  

Our ability to detect CNVs due to somatic mosaicism is limited.

We have confidence in our ability to track a specimen once it has been received by PreventionGenetics. However, we take no responsibility for any specimen labeling errors that occur before the sample arrives at PreventionGenetics.

A negative finding does not rule out a genetic diagnosis.

Genetic counseling to help to explain test results to the patients and to discuss reproductive options is recommended.

Order Kits

Ordering Options


myPrevent - Online Ordering
  • The test can be added to your online orders in the Summary and Pricing section.
  • Once the test has been added log in to myPrevent to fill out an online requisition form.
REQUISITION FORM
  • A completed requisition form must accompany all specimens.
  • Billing information along with specimen and shipping instructions are within the requisition form.
  • All testing must be ordered by a qualified healthcare provider.

SPECIMEN TYPES
WHOLE BLOOD

(Delivery accepted Monday - Saturday)

  • Collect 3 ml -5 ml (5 ml preferred) of whole blood in EDTA (purple top tube) or ACD (yellow top tube). For Test #500-DNA Banking only, collect 10 ml -20 ml of whole blood.
  • For small babies, we require a minimum of 1 ml of blood.
  • Only one blood tube is required for multiple tests.
  • Ship blood tubes at room temperature in an insulated container. Do not freeze blood.
  • During hot weather, include a frozen ice pack in the shipping container. Place a paper towel or other thin material between the ice pack and the blood tube.
  • In cold weather, include an unfrozen ice pack in the shipping container as insulation.
  • At room temperature, blood specimen is stable for up to 48 hours.
  • If refrigerated, blood specimen is stable for up to one week.
  • Label the tube with the patient name, date of birth and/or ID number.

DNA

(Delivery accepted Monday - Saturday)

  • Send in screw cap tube at least 5 µg -10 µg of purified DNA at a concentration of at least 20 µg/ml for NGS and Sanger tests and at least 5 µg of purified DNA at a concentration of at least 100 µg/ml for gene-centric aCGH, MLPA, and CMA tests, minimum 2 µg for limited specimens.
  • For requests requiring more than one test, send an additional 5 µg DNA per test ordered when possible.
  • DNA may be shipped at room temperature.
  • Label the tube with the composition of the solute, DNA concentration as well as the patient’s name, date of birth, and/or ID number.
  • We only accept genomic DNA for testing. We do NOT accept products of whole genome amplification reactions or other amplification reactions.

CELL CULTURE

(Delivery preferred Monday - Thursday)

  • PreventionGenetics should be notified in advance of arrival of a cell culture.
  • Culture and send at least two T25 flasks of confluent cells.
  • Some panels may require additional flasks (dependent on size of genes, amount of Sanger sequencing required, etc.). Multiple test requests may also require additional flasks. Please contact us for details.
  • Send specimens in insulated, shatterproof container overnight.
  • Cell cultures may be shipped at room temperature or refrigerated.
  • Label the flasks with the patient name, date of birth, and/or ID number.
  • We strongly recommend maintaining a local back-up culture. We do not culture cells.
loading Loading... ×

Copy Text to Clipboard
×